Firmware v26.1001.0001 is a maintenance update for EleksTube IPS. It fixes an issue in the web control panel where changes to a Smart Schedule rule reverted to their saved values every few seconds while you were still editing.
Release scope: This update is for EleksTube IPS Gen3 devices. It changes only the web control panel built into the firmware; clock behavior, display modes, and the EleksTube iOS and Android apps are unaffected.
What was fixed
While the web control panel is open, it checks the clock's status every few seconds to keep the page up to date. In earlier firmware, each of those checks also reloaded the rule you were editing. A new name you were typing, a rule you had just switched off, or a trigger time you had changed could jump back to the saved value before you had a chance to select Save rule.
In v26.1001.0001, the status check updates only the schedule's on/off switch and status line. The rule editor now keeps your changes in place until you save them.
Thank you for the report
This fix started with a detailed report from a customer who noticed the problem right after setting up a new clock. Thank you — reports like this help us find and fix issues quickly.
Get the update
Visit the EleksTube WebUI Firmware Installer, select v26.1001.0001 (Latest), and follow the installer guidance. Use Google Chrome or Microsoft Edge on a computer, and connect the clock with a USB data cable.
Your Wi-Fi, time zone, Smart Schedule rules, and other settings are kept during the update.
After updating, open the clock's web control panel and check that the firmware version at the top reads v26.1001.0001.
